The RAPIX Zone Controller is an embedded Ethernet/DALI controller for the Diginet RAPIX Lighting Control System that supports seamless joining of individual DALI lines in a building.
Each Zone Controller can connect up to four physical DALI Lines and communicate over an Ethernet network to lines on other Zone Controllers.
The controller software allows DALI Devices and DALI Groups across any DALI Line to be linked together to form DALI Xi ‘Zones’ and ‘Scenes’ to suit the application.
The rules engine in the controller can run user-configurable scripts to track and control DALI devices based upon events in the system.
The Zone Controller Features
The Zone Controller Anatomy
The Zone Controller connects to the following:
LCD and Control Buttons
The Zone Controller includes an LCD interface and seven control buttons.
The powerful menu system provides an array of system control and information options to assist commissioning and on going maintenance.
Typical high level RAPIX system architecture
All DALI lines in a RAPIX system connect to a Zone Controller (up to 4 DALI Lines per Zone Controller).
The Zone Controllers are connected together using a standard Ethernet network, allowing all DALI communication to be shared across the entire system, rather than being restricted to one Line.
Connections between a Zone Controller and an eHub
RAPIX eHubs manage input device DALI communications, power requirements, and logic functions.
eHubs connect directly to a DALI Line, which are in turn connected to a Zone Controller. The DALI commands generated by eHubs are seen and interpreted by all Zone Controllers. These DALI commands are therefore able to control any combination of DALI control gears and DALI output devices on any DALI Lines in an installation.
eHubs do not require a DALI Short Address and draw only 2mA from the DALI line. Up to 24 eHubs can be connected to a single DALI line.
What would you like to do?
Detailed information so you can design the most efficient and powerful RAPIX Lighting Control System quickly and easily.
Make sure your RAPIX Lighting Control System design is specified correctly to deliver peak performance and ensure adherance to your design intent.
The complete resource of single line diagrams, CAD blocks and system configuration and system topology drawings you will need to design systems of any size.