RAPIX Switch Accessories
RAPIX Switch Accessories provide an innovative, simple and effective way to modify the appearance of RAPIX Lighting Control System’s modular switch plates. This can be done easily, in seconds, on site by facility managers and building owners without the need to order new equipment or experience extended delays associated with equipment replacements.
Just another way RAPIX Lighting Control System saves everyone time and simplifies maintaining your RAPIX Lighting Control System.
Coloured Bezel Kit for LEDsmart and RAPIX Push Button Dimmers/Switches/Timers
This kit allows LEDsmart Push Button Dimmers, Switches and Timers and RAPIX Modular Push Button Switches to be customised to provide a blue, orange or green indicator, rather than the standard white indicator.
The Retaining Bezel on a LEDsmart or RAPIX Push Button is supplied with a clear finish. This allows the white LED indicator to provide a white glow around the button. The clear bezel can be replaced with a green, orange or blue version supplied in the kit. This changes the colour of the LED indicator from white to the colour of the replacement bezel.
A – Bezel and Dial Removal Tool
B – Push Button Retaining Bezel – Orange
C – Push Button Retaining Bezel – Blue
D – Push Button Retaining Bezel – Green
Use the Bezel and Dial Remove Tool (A) to engage with the slot on the side of the push button housing, as shown above.
Push the tool into the slot until the clear bezel around the button releases from the housing. Repeat the process on the other side of the housing.
The clear bezel can now be lifted up to remove from the housing.
Take a required coloured bezel from the kit.
Place the bezel into the housing, ensuring the four bezel legs line up with the bezel retaining holes in the housing. Push the bezel firmly into place.
The coloured bezel fitted.
Accessory Kit Downloads
This kit has been designed to adapt Diginet LEDsmart and RAPIX Rotary dimmers/switches to suit Clipsal Saturn™ and Clipsal Saturn Zen™ wall plates.
(Clipsal Saturn™ and Clipsal Saturn Zen™ are products of Schneider Electric (Australia) Pty Ltd)
What would you like to do?
Detailed information so you can design the most efficient and powerful RAPIX Lighting Control System quickly and easily.
Make sure your RAPIX Lighting Control System design is specified correctly to deliver peak performance and ensure adherance to your design intent.
The complete resource of single line diagrams, CAD blocks and system configuration and system topology drawings you will need to design systems of any size.